DA98A AC Servo motor
DA98A AC Servo motor With high cost-performance and wide application, DA98D AC Servo drive unit is integrated the single-axis motion control function. Pulse command and analog command input, position feedback output and many l/O Iinterfaces defined by customer to match with all kind of open-loop or closed-loop controller to realize the position open-loop or speed […]
hotline: (+84)972 353 760
liên hệ ngay
chi tiết sản phẩm
DA98A AC Servo motor
With high cost-performance and wide application, DA98D AC Servo drive unit is integrated the single-axis motion control function.
Pulse command and analog command input, position feedback output and many l/O Iinterfaces defined by customer to match with all kind of open-loop or closed-loop controller to realize the position open-loop or speed closed-loop controller;
Integrated the single-axis control function without the command control unit to realize the automatically completing the single-axis cycle motion and l/O control with the high cost- performance, and widely applied to the automation field;
Simple and active single-axis command system to avoid the mistake the programming phrasing.
MODEL |
DA98D-10 |
DA98D- 13 |
DA98D- 15 |
DA98D- 23 |
DASBP- 25 |
DASBP- 39 |
Output power (KW)* |
1.0 |
1.3 |
1.5 |
2.3 |
2.5 |
3.9 |
Suitable motor (SJT series) |
110SJT- M040D |
110SJT- M060D |
||||
130SJT- M040D |
130SJT- M050D |
130SJT- M060D |
130SJT- M150B |
130SJT- M100D |
130SJT- M150D |
|
Input power |
Single phase or 3 phases AC (0.85~1.1) ×220V 50Hz/60Hz |
3 phases AC (0.85~1.1) ×220V 50Hz/60Hz |
||||
Working condition |
Temperature: working: 0~55°C storage: -20°C~80°CHumidity: less than 90% (no dew)Vibration: less than 0.5G (4.9m/S2), 10Hz~60Hz (no conftinuous run) |
|||||
Control mode |
1/position control 2/speed control 3/speed dry run 4/JOG run |
|||||
Rebirth brake |
Inner |
|||||
Control characters |
Speed frequency response: not less than 200Hz |
|||||
Speed fluctuation: <± 0.03 (load: 0~100%); <±0.02 (power: -15~+10%)(value corresponding to rated speed) |
||||||
Speed ratio: 1:5000 |
||||||
Pulse frequency: ≤500kHz |
||||||
Control input |
1/servo enable 2/alarm release 3/CCW drive forbid 4/CW drive forbid 5/warp counter cleanup/ speed select 1 6/dictate pulse forbid/speed select 2 7/CCW torque limit 8/CW torque limit |
|||||
Control output |
1/servo prepared output 2/servo alarm output 3/posifioned output/ speeded output |
|||||
Position control |
Input mode |
1/pulse + direction 2/CCW pulse/ CW pulse 3/2 phases A/B quadrature pulse |
||||
Electric gear ratio |
1~32767/1~32767 |
|||||
Feedback pulse |
10000 pulse/rotation |
|||||
Speed control |
4 kinds inner speed |
|||||
Shifing function |
Parameters setting shifting time: 1ms~10000ms (0r/min-1000r/min) |
|||||
Monitoring function |
Rev, current position, dictate pulse accumulate, position warp, motor torque, motor current, linear speed, rotor absolute position, dictate pulse frequeney, running state, l/O terminal signal and so on. |
|||||
Protection function |
Overspeed, main power overvoltage/ undervoltage, overcurrent, overload, brake abnormity, encoder singularity, control power unconventionality, bosition warp, etc |
|||||
Display, operation |
6bits LED, 4 buttons |
|||||
Suitable load inertia |
Less than 5 times of the motor’s inertia |
|||||
Weight |
2.8 Kg |
|||||
Oversize |
244mmx163mmx92mm (see the figure) |
|||||
