DA98D AC Servo Motor
DA98D AC Servo Motor Driver With high cost-performance and wide application, DA98D AC Servo drive unit is integrated the single-axis motion control function. Pulse command and analog command input, position feedback output and many l/O Iinterfaces defined by customer to match with all kind of open-loop or closed-loop controller to realize the position open-loop or […]
chi tiết sản phẩm
DA98D AC Servo Motor Driver
With high cost-performance and wide application, DA98D AC Servo drive unit is integrated the single-axis motion control function.
Pulse command and analog command input, position feedback output and many l/O Iinterfaces defined by customer to match with all kind of open-loop or closed-loop controller to realize the position open-loop or speed closed-loop controller;
Integrated the single-axis control function without the command control unit to realize the automatically completing the single-axis cycle motion and l/O control with the high cost- performance, and widely applied to the automation field;
Simple and active single-axis command system to avoid the mistake the programming phrasing.
| MODEL | DA98D-10 | DA98D- 13 | DA98D- 15 | DA98D- 23 | DASBP- 25 | DASBP- 39 |
| Output power (KW)* | 1.0 | 1.3 | 1.5 | 2.3 | 2.5 | 3.9 |
| Suitable motor (SJT series) | 110SJT- M040D | 110SJT- M060D | ||||
| 130SJT- M040D | 130SJT- M050D | 130SJT- M060D | 130SJT- M150B | 130SJT- M100D | 130SJT- M150D | |
| Input power | Single phase or 3 phases AC (0.85~1.1) ×220V 50Hz/60Hz | 3 phases AC (0.85~1.1) ×220V 50Hz/60Hz | ||||
| Working condition | Temperature: working: 0~55°C storage: -20°C~80°C Humidity: less than 90% (no dew) Vibration: less than 0.5G (4.9m/S2), 10Hz~60Hz (no conftinuous run) |
|||||
| Control mode | 1/position control 2/speed control 3/speed dry run 4/JOG run | |||||
| Rebirth brake | Inner | |||||
| Control characters | Speed frequency response: not less than 200Hz | |||||
| Speed fluctuation: <± 0.03 (load: 0~100%); <±0.02 (power: -15~+10%) (value corresponding to rated speed) |
||||||
| Speed ratio: 1:5000 | ||||||
| Pulse frequency: ≤500kHz | ||||||
| Control input | 1/servo enable 2/alarm release 3/CCW drive forbid 4/CW drive forbid 5/warp counter cleanup/ speed select 1 6/dictate pulse forbid/speed select 2 7/CCW torque limit 8/CW torque limit | |||||
| Control output | 1/servo prepared output 2/servo alarm output 3/posifioned output/ speeded output | |||||
| Position control | Input mode | 1/pulse + direction 2/CCW pulse/ CW pulse 3/2 phases A/B quadrature pulse | ||||
| Electric gear ratio | 1~32767/1~32767 | |||||
| Feedback pulse | 10000 pulse/rotation | |||||
| Speed control | 4 kinds inner speed | |||||
| Shifing function | Parameters setting shifting time: 1ms~10000ms (0r/min-1000r/min) | |||||
| Monitoring function | Rev, current position, dictate pulse accumulate, position warp, motor torque, motor current, linear speed, rotor absolute position, dictate pulse frequeney, running state, l/O terminal signal and so on. | |||||
| Protection function | Overspeed, main power overvoltage/ undervoltage, overcurrent, overload, brake abnormity, encoder singularity, control power unconventionality, bosition warp, etc | |||||
| Display, operation | 6bits LED, 4 buttons | |||||
| Suitable load inertia | Less than 5 times of the motor’s inertia | |||||
| Weight | 2.8 Kg | |||||
| Oversize | 244mmx163mmx92mm (see the figure) | |||||
Following are the matching motor and specifications:
Each unit includs 1 AC Servo Motor and 1 Motor Driver.
DA98D-15-130S.JT-M100B
Incl. 1500W, 10NM, 1500rpm, 6.0A, 130mm support AC Servo Motor
DA98D-25-130S.JT-M100D
Incl. 2500W, 10NM, 2500rpm, 10A, 130mm support AC Servo Motor
DA98D-23-130S.JT-M150B
Incl. 2300W, 15NM, 1500rpm, 8.5A, 130mm support AC Servo Motor
DA98D-39-130S.JT-M150D
Incl. 3900W, 15NM, 2500rpm, 14.5A, 130mm support AC Servo Motor
DA98D-27-175S.JT-M180B
Incl. 2700W, 18NM, 1500rpm, 16.5A, 175mm support AC Servo Motor
DA98D-45-175S.JT-M180D
Incl. 4500W, 18NM, 2500rpm, 18A, 175mm support AC Servo Motor
DA98D-33-175S.JT-M220B
Incl. 3300W, 22NM, 1500rpm, 19A, 175mm support AC Servo Motor
DA98D-55-175S.JT-M220D
Incl. 5500W, 22NM, 2500rpm, 22A, 175mm support AC Servo Motor
DA98D-45-175S.JT-M300B
Incl. 4500W, 30NM, 1500rpm, 26A, 175mm support AC Servo Motor
DA98D-75-175S.JT-M300D
Incl. 7500W, 30NM, 2500rpm, 30A, 175mm support AC Servo Motor
BRAKE FUNCTION* Optional, For AC servo motors Torque>1S5NM
BRAKE FUNCTION* Optional, For AC servo motors Torque less or equal to 15NM
